We report here on the quantitative 3D reconstruction of core-shell nanostructures by STEM/EDX using two X-ray maps acquired at two different tilt angles perpendicular to each other (Rueda et al., 2016; fig. 1). The method is based on the modelling of the NW cross-section using a series of imbricated ellipses whose dimensions are defined by their major and minor diameters (fig. 2). The number of ellipse depends on the number of chemical phases which are identified from the concentration profiles. The position and orientation of each ellipse are determined by the coordinates of their respective centers and the overall tilt of the nanowire, respectively. More sophisticated models, using hexagons or rectangles instead of ellipses, have been developed in order to take into account the crystal structure of nanowires exhibiting facetted sidewalls. These models are based on the elliptical model, by constructing the tangents to an ellipse, and hence, are defined by the same parameters, which is useful when comparing models. Considering a system of a number of K ellipses with ξk,j the local concentration of element j for the kth ellipse (k=1 for the largest ellipse), then the average concentration Ci,j of element j for the ith pixel along the x-axis must satisfy the following equations (equations 1):
Ci,jt1,i = ξK,jtK,i for K=1
Ci,jt1,i = ΣKk=2 ξk-1,j(tk-1,i – tk,i) + ξK,jtK,i for K≥2
With t1,i and tk,i, the local thickness at pixel i of the first and kth ellipse, respectively. The local thickness of the first ellipse (= the total thickness of the cross-section) and the average concentration Ci,j of element j present along the beam axis is determined using the zeta-factor method (Watanabe and Williams, 2006):
t1,i = Σmj=1Ii,jζjAi,j/Ibρ (equation 2)
Ci,j = Ii,jζjAi,j/Σmj=1Ii,jζjAi,j (equation 3)
With: m the total number of element, Ib the beam current; ρ the sample density; ζj the zeta-factor of element j determined using reference samples of known composition and thickness (Lopez-Haro et al., 2014); Ii,j and Ai,j the net X-ray intensity and the absorption correction term for element j at pixel i, respectively. The absorption correction term is estimated from a simple model that takes into account the direction of the X-ray emission relative to the position of the detectors, knowing the thickness, density, and mass absorption coefficient of the material through which the radiation travels (Rueda et al., 2016).
The method for reconstructing the cross-section can be divided into three steps: 1) the appropriate cross-sectional model is selected by comparing the thickness profile calculated from equation  with the thickness profile simulated for elliptical, hexagonal, and rectangular cross-sections (figure 3); 2) the number of ellipses is determined, and their dimensions are evaluated, from the concentration profiles; 3) the local concentrations ξk,j are determined and the dimensions of the ellipses are adjusted by minimizing the compositional differences between profiles calculated from equation  and simulated by equation .
This method was applied for reconstructing core-shell nanostructures on (Mg, Mn, Cd, Zn)(Te,Se) and (Al, Cu)Ge nanowires and (Pt, Co) nanoparticles. Advantages and limitations of the method will be presented and discussed at the conference.
References: P. Rueda-Fonseca, E. Robin, E. Bellet-Amalric, M. Lopez-Haro, M. Den Hertog, Y. Genuist, R. Andre, A. Artioli, S. Tatarenko, D. Ferrand, and J. Cibert (2016) Quantitative Reconstructions of 3D Chemical Nanostructures in Nanowires, Nanoletters, DOI: 10.1021/acs.nanolett.5b04489.
M. Watanabe & D. B. Williams (2006) The quantitative analysis of thin specimens: a review of progress from the Cliff-Lorimer to the new ζ-factor methods, Journal of Microscopy 221, 89–109.
M. Lopez-Haro, P. Bayle-Guillemaud, N. Mollard, F. Saint-Antonin, C. Van Vilsteren, B. Freitag and E. Robin (2014) Obtaining an accurate quantification of light elements by EDX: K-factors vs. Zeta-factors, 18th International Microscopy Congress, Czechoslovak Microscopy Society: Prague.
To cite this abstract:Eric Robin, Miguel Lopez-Haro, Nicolas Mollard, Pamela Rueda-Fonseca, Marta Orru, Edith Bellet-Amalric, Yann Genuist, Regis Andre, Alberto Artioli, Serge Tatarenko, David Ferrand, Joel Cibert, Khalil El Hajraoui, Martien Den Hertog, Thibault Cremel, Kuntheak Kheng, Laure Guetaz; Discrete STEM/EDX tomography for quantitative 3D reconstructions of chemical nanostructures. The 16th European Microscopy Congress, Lyon, France. https://emc-proceedings.com/abstract/discrete-stemedx-tomography-for-quantitative-3d-reconstructions-of-chemical-nanostructures/. Accessed: September 20, 2021
EMC Abstracts - https://emc-proceedings.com/abstract/discrete-stemedx-tomography-for-quantitative-3d-reconstructions-of-chemical-nanostructures/